All guides / Assembly
How to make print-and-play cards at home
Build an inexpensive deck using paper inserts, sleeves, or cardstock.
Pick a construction method
For a deck you expect to revise, print fronts on plain paper and slide them into sleeves in front of identical spare cards. The spare cards add stiffness and you can replace a single insert between sessions. For cards that stay face up on the table, cardstock alone may be enough. Check the printer’s supported media weight and feed instructions before loading thick paper.
Test fit with a real sleeve
Cut one sample at the intended size and put it into the same sleeve you plan to use for the rest of the deck. Add the backing card during the test. A sleeve may fit the printed width but buckle once both layers go in. If a sample catches at the opening, check its cut edges and its dimensions before shrinking the print job. Reducing an entire page can also make small rules text harder to read.
Cut in an order that keeps the guides visible
On a page with external crop marks, trim one direction into strips first, leaving the end marks needed for the next cut. Keep a finished sample nearby to catch drift between strips. A paper trimmer helps with repeated straight cuts. With scissors, work along a well-lit cutting line and stop to measure the first card in each row. Consistent edges matter most when the decks are shuffled or dealt face down.
Check the backs and the shuffle
Lay five finished cards face down and look across them from table height. An exposed insert, bright edge, or unusually tall card can give away its identity. Keep the backing material and sleeve style consistent across the deck, including any replacement cards. Shuffle a small stack before building the full set. If the cards slide out of their sleeves, trim a clean sample and test it before repeating the cut.
Store cards by role
Put the main deck, reference cards, and starting cards in separate paper bands. Write each pile’s size on its band. If the game needs 18 draw cards and two references, you can spot a missing card during setup without reading every front.